E-Z Build Greenhouses
SIZES
Widths: 16’, 20’, 24’ & 30’ free standing (custom widths available)
Lengths: any length in 12’ increments (36’, 48’, 60’ etc.)
Ground to peak Heights: 8’, 9’, 10’ & 11’ (custom heights available)
STRUCTURAL COMPONENTS
Posts
2” x 14 ga galvanized structural tubing placed every 6’ in sidewalls
Side purlins
5/8” high x 3 ½” x 20 ga. hatbox channel
Concrete foundation:
Owners option; between 1 to 2 cf of concrtete recommended per post
14 GA. GALVALUME, 8” WIDE, 2½” EDGES, 1½” LIP
ROOF STRUCTURE
BOWS
bolted every 6’ to 2” posts
1-5/8” X 19 GA STRUCTURAL TUBING FOR 16’, 20’ & 24’
1-5/8” X 17 GA STRUCTURAL TUBING FOR 30’
ROOF PURLINS
1-3/8” X 19 GA STRUCTURAL TUBING TO RUN CONTINUOUS THE LENGTH OF THE HOUSES SECURING THE BOWS TOGETHER
1 TOTAL IN 16’ & 20’ HOUSES
3 TOTAL IN 24’ & 30’ HOUSES
Gable diagonals
each gable is diagonally braced to posts and bows
Roof covering
Poly
single or double layer, 6 mil, 4 year poly, white or clear
Poly fastening
the entire roof perimeter to have aluminum wirelock for securing covering
Blowers
(for double poly inflation) Dayton shade pole, squirrel cage blowers mounted on aluminum brackets
Gable end framing
Structure
includes vertical and horizontal pipes with brackets and fasteners optional concrete gable end pipes
Coverings
poly with wirelock
Corrugated polycarbonate
Shadecloth
Walk-in doors
3’ or 4’ x 6’ 8” aluminum framed & clad, wood core doors with locking hardware
Sliding doors
16 ga galvanized 1-1/2” sq. tubing welded to required size
Trimmed with aluminum angle and covered with polycarbonate
Hanging capabilities
Any basket or produce supports must not be integrated with building structure
Available extras
Fans, cooling ststems, haf fans, heating systems, irrigation systems, manual or motorized curtain systems, shade systems, benches & walkways
Engineering
this design has not been engineered as an acceptable wind loaded structure
I b & s assumes no responsibility for its structural integrity