Metal Building

Sizes

Widths –
20′, 24′, 30′, 36′ & 40′ standard
Custom widths available, add on adaptions available

Lengths –
Any length in 12′ increments, custom lengths available

Heights –
8′ to 16′ at eaves

Roof slope –
3/12 standard, custom slopes available

Structural Components

Posts –
8′, 9′ & 10′ eaves: 12 ga. galvanized 2″ x 3-1/4″ C-profile
11′ & 12′ eaves: 12 ga. galvanized 3-1/2″ x 3-1/2″ C-profile
13′ & 14′ eaves: 11 ga. galvanized 3″ x 3″ square tubing
15′ & 16′ eaves: 9 ga. galvanized 4″ x4″ square tubing

Roof & Side Purlins-
2-3/8″ high, 14 ga. galvanized hatbox channel

Wind Bracing –
1/4″ galv. cable with 5/16″ eyebolts

Concrete Foundation –
Either 16″ x 3′ deep concrete piers with posts embedded in concrete or anchor bolts in built up slab edges

Roof Structure

Welded trusses of 12 ga., 14 ga. & 16 ga. channel bolted to posts & at center of truss with 1-1/2″ HDG bolts. Square tubing diagonal bracing at each gable.

Coverings

29 ga. or 26 ga. metal galvanized, galvalume or painted/galvalume
Available in Pro Panel (residential or agricultural) or PBR Panel (commercial)
Variety of colors for panels, trim & fasteners
Trim includes: ridge cap, inside & outside corners, gable flashing, J-trim, gutters, downspouts & skylights

Side and Endwall Treatment

Fully sheeted, open or a combination

Available Extras

Walk-in doors, overhead doors, windows, insulation, concrete slabs and truck-wells.

Engineering

Imperial channel truss structures meet or exceed the ‘Florida Building Code’ Requirements